- PII
- S30346215S0015323025030104-1
- DOI
- 10.7868/S3034621525030104
- Publication type
- Article
- Status
- Published
- Authors
- Volume/ Edition
- Volume 126 / Issue number 3
- Pages
- 342-353
- Abstract
- The paper presents the developed model for predicting the behavior of a ferritic-martensitic steel during all creep stages. A modified θ-projection method is proposed as a solution. The main advantages of the method are abilities to model creep curves for a wide range of temperatures and stresses (which reduces the need for long-term run tests); to validate calculations by determining time to failure; to predict a steadystate creep rate. Despite the usefulness of the proposed approach, certain limitations are noted that result in modeling uncertainties. Higher accuracy and robustness can be achieved using a "mechanical equation of state equation" model of Rabotnov type.
- Keywords
- ферритно-мартенситная сталь метод θ-проекции ползучесть длительная прочность время до разрушения моделирование
- Date of publication
- 13.02.2025
- Year of publication
- 2025
- Number of purchasers
- 0
- Views
- 22
References
- 1. ASME Boiler & Pressure Vessel Code, Section III - Rules for Construction of Nuclear Facility Components - Section II - Part D Properties (Customary). ASME 2019 Edition.
- 2. Сапунов В.Т. Прогнозирование ползучести и длительной прочности жаропрочных сталей и сплавов ЯЭУ. М.: НИЯУ МИФИ, 2015. 136 с.
- 3. Riedel H. Fracture at High Temperature. Berlin: Springer, 1987. 418 p.
- 4. Булыгин И.И., Голубовский Е.Р., Трунин И.И. Прогнозирование характеристик ползучести сплавов для ГТД // Проблемы прочности. 1978. № 6. С. 19-21.
- 5. Работнов Ю.Н. Ползучесть элементов конструкций. М.: Наука, 1966. 753 с.
- 6. Качанов Л.М. Теория ползучести М.: ФИЗМАТЛИТ, 1960. 455 с.
- 7. Evans R., Parker J., Wilshire B. Recent advances in creep and fracture of engineering materials and structures. B. Wilshire and D.R.J. Owen. Pineridge Press, 1982. 135.
- 8. Evans R. Statistical scatter and variability of creep property estimates in θ projection method // Mater. Sci. Technol. 1989. V. 5. P. 699-707.
- 9. ГОСТ 10145-81. Металлы. Метод испытания на длительную прочность.
- 10. Jeyaraj A., Vijayanand V.D., Ganesan V. Grain size effect on creep properties of 304HCu SS and modelling of creep curves using modified theta projection approach // Trans. Ind.National Academy of Engineering. 2021. V. 10.
- 11. Peng Yu, Weimin Ma. A modified theta projection model for creep behavior of RPV steel 16MND5 // J. Mater. Sci. Techn. 2020. V. 47. P. 231-242.
- 12. Evans M. Sensitivity of the theta projection technique to the functional form of the theta interpolation/extrapolation function // J. Mater. Sci. 2002. V. 37. P. 2871-2884.
- 13. Деммел Дж. Вычислительная линейная алгебра. М.: МИР, 2001. 430 с.
- 14. Perez J. An alternative method of calibration and prediction for the theta-projection model // ETD Collection for University of Texas. 2019. V. 69.
- 15. Srinivasan V., Vanajal J., Choudhary B. Modeling of creep deformation behaviour of RAFM steel // Trans. Ind. Institute of Metals. 2016. V. 69. P. 567-571.
